3/4" Drive 30mm 12-Point Metric Standard Length Hand Socket
Weight | 0.71 lbs |
---|---|
Nut End Hex Depth (D) | 19.5 |
Nut End Outside Diameter (B) | 40.6 |
Socket Length (L) | 56.4 |
Socket Size | 30 |
- What is a 33 mm socket in inches?
- How wide in inches is 25mm?
- How do you convert MM to MM?
- What is MM size?
- Is there a 33 mm socket?
- What is 28mm socket in Imperial?
- What is a 28mm socket in standard?
- Can you use metric sockets on standard bolts?
What is a 33 mm socket in inches?
A 33mm metric socket is 1.29921 inches in size which most closely matches a 1 5/16 standard size socket.
How wide in inches is 25mm?
24mm = just over 15/16 inch. 25mm = almost 1 inch.
How do you convert MM to MM?
The millimeters unit number 1,000,000,000.00 mm converts to 1 Mm, one megameter. It is the EQUAL length value of 1 megameter but in the millimeters length unit alternative.
What is MM size?
A measure of length in the metric system. A millimeter is one thousandth of a meter. There are 25 millimeters in an inch. Enlarge. Tumor sizes are often measured in millimeters (mm) or centimeters.
Is there a 33 mm socket?
Capri Tools Deep Impact Socket, 1/2-Inch Drive, 6-Point, Metric (33 mm)
What is 28mm socket in Imperial?
1.105 inches = 28mm often used as a substitute for 5/8 inch whit (actually .
What is a 28mm socket in standard?
This Metric Standard Length Socket has a 28mm socket size. 3/4" Drive. 12 Point.
Can you use metric sockets on standard bolts?
Can you use Metric sockets on SAE fasteners or SAE Sockets on Metric Fasteners? Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.