Diyvehiclerepair
The plate must have certain safety details. Some important safety details include: maximum capacity, load center, maximum fork height and truck weight. The forklift operator must be trained on how to read the capacity plate. The maximum capacity is the amount of weight the forklift is allowed to lift.
- What information is provided on the lift truck capacity plate?
- What is required information on a forklift nameplate?
- What is a capacity plate on a forklift?
- How should a loaded lift truck be driven on a ramp?
- Does a forklift need a capacity plate?
- What is a data plate?
- Do you need a license plate for a forklift?
- What information is on a capacity plate?
- How is forklift capacity calculated?
- What is a class 3 lift truck?
- What is a lift truck?
What information is provided on the lift truck capacity plate?
Sometimes referred to as a capacity plate or a forklift nameplate, the forklift data plate includes important information such as weight, fuel type, and forklift load capacity. Associates need to read the data plate during training and before use to help build the culture of safety in your facility.
What is required information on a forklift nameplate?
The nameplate should include the weight of the forklift both with and without the battery. It should also include the forklift serial and model numbers. This is the best way for you and technicians to identify your machine.
What is a capacity plate on a forklift?
According to the Occupational Safety & Health Administration (OSHA), a standard forklift capacity plate is a nameplate that contains the capacity of the lift truck, where the capacity is defined as “the manufacturer's guideline for how much weight a forklift can safely lift.”1 The nameplate contains a host of ...
How should a loaded lift truck be driven on a ramp?
Loaded forklifts must be driven with the load pointed up the ramp (good standard practice is to ALWAYS drive with the load pointed up the ramp or slope). Raise levels should be limited to the minimum height necessary for ground clearance.
Does a forklift need a capacity plate?
Every forklift has a data plate, also known as a name plate or forklift capacity plate. As you probably guessed, it provides important information on how much weight the forklift can carry. The capacity listed on your forklift's data plate cannot exceed the maximum capacity of any of its load bearing components.
What is a data plate?
What is a Data Plate? The Data Plate is a paper label affixed inside the home and is the size of a standard sheet of paper (8 ½” x 11”). The Data Plate can be found in a kitchen cabinet, an electrical panel, or a bedroom closet.
Do you need a license plate for a forklift?
Appropriate lighting is also needed for public roads, including an amber beacon that lights up (this is for occasions when the forklift will be travelling below 25mph). License plates will also be required, like any other road vehicle.
What information is on a capacity plate?
Look for a capacity plate near the operator's position or on the transom of the boat. This plate indicates the maximum weight capacity and/or the maximum number of people that the boat can carry safely in good weather. You should not exceed either the stated maximum weight capacity or the maximum number of people.
How is forklift capacity calculated?
You can determine the Maximum Load Moment for any forklift by multiplying the weight rating by the center load distance state on the data plate. In the example we used above, it would be a 5,000 lb capacity multiplied by a 24 inch load center (5,000 x 24), which gives you a Maximum Load Moment of 120,000 inch pounds.
What is a class 3 lift truck?
Class III: Electric motor hand trucks or hand/rider trucks. Class IV: Internal combustion engine trucks (solid/cushion tires) Class V: Internal combustion engine trucks (pneumatic tires) Class VI: Electric and internal combustion engine tractors. Class VII: Rough terrain forklift trucks.
What is a lift truck?
: a small truck for lifting and transporting loads.
